I remember recovering dead 18650 cells from laptop batteries and “restoring” them with a 12V modded PC PSU. Quite a few of them actually started working again and had some capacity for a few tens of additional cycles. Those cells were never left unattended in a charger and they were always only used in a device you could chuck in a moment’s notice.
How did that process work? Did you just connect the +/- ends of the cell to the +/- 12v wires of the PSU and let it feed from the high-amp outputs? Imagine there’s plenty of amps on the GPU and CPU power wires
Yup, just plugged it in there. The internal resistance of these cells was high enough that it limited the current somewhere between 3-8A. And this was done only briefly as these cells got quite…warm.
I remember recovering dead 18650 cells from laptop batteries and “restoring” them with a 12V modded PC PSU. Quite a few of them actually started working again and had some capacity for a few tens of additional cycles. Those cells were never left unattended in a charger and they were always only used in a device you could chuck in a moment’s notice.
10/10 do not recommend.
How did that process work? Did you just connect the +/- ends of the cell to the +/- 12v wires of the PSU and let it feed from the high-amp outputs? Imagine there’s plenty of amps on the GPU and CPU power wires
Yup, just plugged it in there. The internal resistance of these cells was high enough that it limited the current somewhere between 3-8A. And this was done only briefly as these cells got quite…warm.